Hyundai Santa Cruz: Body (Interior and Exterior) / Sunroof

Side Sill Molding

- Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent h ...

Components and Components Location

- Components 1. Glass panel assembly2. Deflector3. Motor assembly4. Spring base assembly5. Set plate assembly6. Guide assembly7. Frame B assembly8. Seal tape9. Rear drip 10. Stopper11. Sunshade ...

Other information:

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Accelerator Pedal
- Removal 1.Turn the ignition switch OFF and disconnect the battery (-) terminal. 2.Disconnect the accelerator position sensor connector (A). 3.Remove the mounting cap (B). 4.Remove the accelerator pedal module from the vehicle after loosening the mounting bolt (A).Tightening Torque :8.8 ...

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rain Sensor
- Description Integrated Rain Sensor Integrated rain sensor (A) controls three systems: front wiper, auto-light, and central air conditioner.1.Wiper Control SystemWhen "AUTO" switch signal is received from the multi-function switch on the right, the integrated rain sensor detects the amoun ...