Trouble status | Inspection item | Inspection |
Not charged | Check the mobile phone status | R-1 |
Amber LED blinks | Overcurrent | R-2 |
Overheating | R-2 | |
Foreign matter | R-2 |
1.If the placement of a mobile phone is not detected
(1)If the internal temperature of the mobile phone battery is high, the mobile phone itself turns "OFF" the power.
(2)If the mobile phone was placed outside the charging range
(3)If the mobile phone was placed by its LCD side on the charging pad surface (if the phone was placed upside down)
(4)If the mobile phone was turned 180˚
2.Check that the amber LED of the wireless charging lamp turns on when the mobile phone is in normal condition and is correctly placed.
1.Overcurrent : Charging stops in overcurrent of over 4.5 A
(1)The overcurrent error status will be reset when the current falls under 4.5 A or when ACC is turned off and on.
2.Overheating : The unit will be automatically turned "OFF" when the internal temperature of the wireless charging unit is over 158°F (70˚C).
(1)The error status will be reset when the internal temperature of the wirelss charging unit falls under 149°F (65°C).
3.Foreign matter : When metallic objects such as coins, clips and precious metals are detected, charging will be stopped to prevent overheating.
(1)Error status will be reset when foreign matter is removed.
• The amber LED of the charging display lamp blinks 10 times for 10 seconds, and then it is turned off for 50 seconds (total 60 seconds).
• The process is repeated for every 60 seconds.
• Turning ACC OFF/ON resets the error status and returns to normal operation.
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Bed Latch Assembly
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Loosen the mounting clips, remove the bed floor latch cover (A).
2.Disconnect t ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Special Service Tools
- Special Service Tools
Tool (Number and Name)IIIustrationUse
0K546-F6100Shock absorber lock nut removal tool
Used for remove the front shock absorber lock nut
09546-3X100Shock absorber lock nut removal tool
Used for remove the rear shock absorber lock nut
09568-2J100Ball joint remover
Removal ...