Hyundai Santa Cruz: AC Inverter System / Specifications
| Item | Specification |
| Rated Voltage | DC 12.5V |
| Operating voltage | DC 12.2 - 15.3V |
| Operating temperature | -30°C to 75°C |
| Output voltage | AC 103.5 -126.5 V (rms) |
| Output frequency | 60 ± 6 ㎐ |
| Rated power | 150W (-30 - 45℃), 75W (-45 - 75℃) |
| Current spec. | Full load input current : Max. 15A (150W) Key OFF current : Max 1㎂ |
Components and Components Location
- Component Location
1. Battery2. AC inverter Unit3. AC inverter outlet
...
AC Inverter Unit
- Components
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the rear seat assembly.(Refer to Body - "Rear Seat Assembly")
3.Disconnect the AC inverter unit connector ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Intake Air Temperature Sensor (IATS)
- Description
Mounted inside the Manifold Absolute Pressure Sensor, Intake Air
Temperature Sensor (IATS) detects the intake air temperature.To
precisely calculate the amount of air, correction of the air temperature
is required as the air density varies with the temperature. So the ECM
us ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Side Sill Molding
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the side seal molding (A).
2.To install, reverse the removal procedure.
...
