Hyundai Santa Cruz: Power Windows / Resetting the power windows
If the power windows do not operate normally, the automatic power window system must be reset as follows:
1. Press the ignition switch to the ON position.
2. Close the window and continue pulling up on the power window switch for at least one second.
If the power windows do not operate properly after resetting, have the system checked by an authorized HYUNDAI dealer.
Power Windows
The ignition switch must be in the ON
position to be able to raise or lower
the windows. Each door has a Power
Window switch to control that door’s
window. The driver has a Power Window
Lock sw ...
Automatic reverse
If a window senses any obstacle while it
is closing automatically, it will stop and
lower approximately 12 in. (30 cm) to
allow the object to be cleared.
If the window detects the resistance
whil ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Bed Top Rail Trim
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the bed top rail trim (A).
2.To install, reverse removal procedure.
&nb ...
Hyundai Santa Cruz 2021-2025 Owners Manual: Smart Cruise Control (SCC)
Basic function
Smart Cruise Control is designed to
help detect the vehicle ahead and
help maintain the desired speed and
minimum distance between the vehicle
ahead.
Overtaking Acceleration Assist
While Smart Cruise Control is operating,
if the function judges that the driver is
determined to o ...
