Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Driving Safety / Manual Speed Limit Assist (MSLA)

(1) Manual Speed Limit Assist enabled indicator
(2) Set speed

You can set the speed limit when you do not want to drive over a specific speed.

If you drive over the preset speed limit, Manual Speed Limit Assist operates (set speed limit will blink and chime will sound) until the vehicle speed returns within the speed limit.

Safe Exit Warning Malfunction and Limitations
Safe Exit Warning malfunction When Safe Exit Warning is not working properly, the ‘Check Blind-Spot Safety system’ warning message appears on the cluster for several seconds, and the master ( ...

Manual Speed Limit Assist Operation
To set speed limit 1. Press and hold Driving Assist () button at the desired speed. The Manual Speed Limit Assist enabled () indicator will illuminate on the cluster. 2. Push the + switch up or ...

Other information:

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Joint Assembly (Wheel side)
- Removal The type can replace the wheel side joint boot 1.Remove the front drive shaft.(Refer to Driveshaft Assembly - "Front Driveshaft") 2.Remove the trans axle side joint.(Refer to Driveshaft Assembly - "Transaxle Joint") 3.Remove the dynamic damper.(Refer to Driveshaft Assembly - "Dynam ...

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Monitor
- Removal 1.Disconnct the negative (-) battery terminal. 2.Remove the front monitor lower cover (A). 3.Remove the front monitor lower cover after disconnecting the mood lamp connector (A). 4.Remove front monitor side cover (A) and (B). 5.Remove the front monitor assembly (A). 6.R ...

© 2023-2025 Copyright www.hysacr.com