Checking the Brake Fluid Level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir.
Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination.
If the level is low, add the specified brake fluid to the MAX level. The level will fall with accumulated mileage. This is a normal condition associated with the wear of the brake linings. If the fluid level is excessively low, have the brake system be checked by an authorized HYUNDAI dealer.
WARNING
If the brake system requires frequent additions of fluid this could indicate a leak in the brake system. Have that the vehicle be inspected by an authorized HYUNDAI dealer.
WARNING
Do not allow brake fluid to come in contact with your eyes. If brake fluid comes in contact with your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention.
NOTICE
Information
Use only the specified brake fluid (refer to “Recommended Lubricants and Capacities” section in chapter 2).
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Cylinder Block
- Disassembly
• Use fender covers to avoid damaging painted surfaces.
• Wait until the engine cools down to room temperature to avoid damaging the cylinder head before removing.
• When handling the metal gasket, be careful not to fold or damage the surface of the ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Ambient Sensor
- Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor;
resistance will increase with lower temperature, and decrease with
higher temperature.The sensor output will be used for discharge
t ...