Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a crash or emergency stop can be thrown against the inside of the vehicle, against other occupants, or be ejected from the vehicle.
Do not use any accessories on seat belts. Devices claiming to improve occupant comfort or reposition the seat belt can reduce the protection provided by the seat belt and increase the chance of serious injury in a crash.
Do not modify the front seats. Modification of the front seats could interfere with the operation of the supplemental restraint system sensing components or side air bags.
Do not place items under the front seats. Placing items under the front seats could interfere with the operation of the supplemental restraint system sensing components and wiring harnesses. Do not cause impact to the doors. Impact to the doors when the Engine Start/Stop button is in the ON or START position may cause the air bags to inflate.
Modifications to accommodate disabilities. If you require modification to your vehicle to accommodate a disability, contact the HYUNDAI Customer Connect Center at 800-633- 5151.
Adding equipment to or modifying your air bag equipped vehicle If you modify your vehicle by changing your vehicle’s frame, bumper system, front end or side sheet metal or ride height, this may affect the operation of your vehicle’s air bag system.
SRS Care
Air Bag Warning LabelsHyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: SRS Control Module (SRSCM)
- Description
The primary purpose of the SRSCM (Supplemental Restraints System
Control Module) is to discriminate between an event that warrants
restraint system deployment and an event that does not. The SRSCM must
decide whether to deploy the restraint system or not. After determining
t ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Wheel Speed Sensor
- Components
1. Front wheel speed sensor2. Front wheel speed sensor connector
- Removal
1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.
2.Remove the front wheel and tire.(Refer to Suspension System - "Wheel")
3.Remove the front wheel guard ...