Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Driver Attention Warning (DAW) / Driver Attention Warning Malfunction and Limitations

Driver Attention Warning malfunction

When Driver Attention Warning is not working properly, the ‘Check Driver Attention Warning (DAW) system’ warning message appears on the cluster for several seconds, and the master () warning light illuminates on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

Limitations of Driver Attention Warning

Driver Attention Warning may not work properly in the following situations:

  • The vehicle is driven violently
  • The vehicle intentionally crosses over lanes frequently
  • The vehicle is controlled by Driver Assistance system, such as Lane Keeping Assist

Leading Vehicle Departure Alert feature

• When the vehicle cuts in

[A] : Your vehicle, [B] : Front vehicle

If a vehicle cuts in front of your vehicle, Leading Departure Alert may not operate properly.

• When the vehicle ahead sharply steers

[A] : Your vehicle, [B] : Front vehicle

If the vehicle in front makes a sharp turn, such as to turn left or right or make a U-turn, etc., Leading Vehicle Departure Alert may not operate properly.

• When the vehicle ahead abruptly departures

If the vehicle in front abruptly departures, Leading Vehicle Departure Alert may not operate properly.

• When a pedestrian or bicycle is between you and the vehicle ahead

If there is a pedestrian(s) or bicycle(s) in between you and the vehicle in front, Leading Vehicle Departure Alert may not operate properly.

• When in a parking lot

If a vehicle parked in front drives away from you, Leading Vehicle Departure Alert may alert you that the parked vehicle is driving away.

• When driving at a tollgate or intersection, etc.

If you pass a tollgate or intersection with lots of vehicles or you drive where lanes are merged or divided frequently, Leading Vehicle Departure Alert may not operate properly.

Information

For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7.

    Driver Attention Warning Operation
    Basic function Display and warning The basic function of Driver Attention Warning is to inform the driver of their ‘Attention Level’ and to warn the driver to ‘Consider taking a break’. Att ...

    Blind-Spot View Monitor (BVM)
    Blind-Spot View Monitor displays the rear blind spot area of the vehicle in the cluster when the turn signal is turned on to help change lanes. Detecting sensor [1], [2] : Surround-side view came ...

    Other information:

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Troubleshooting
    - Troubleshooting SymptomSuspect area Engine will not start or hard to startVapor hose damaged or disconnected Engine struggles to startMalfunction of the Purge Control Solenoid Valve Rough idle or engine stallsVapor hose damaged or disconnected Malfunction of the PRV (Pressure Regulating Val ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Description and Operation
    - OBD-II Review 1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, OBD-I, required monitoring of the fuel metering system, Exhaust Gas Recirculation (EGR) ...

    © 2023-2025 Copyright www.hysacr.com